Your cart
Close Alternative Icon
Free Shipping On Orders Over $50! Free Shipping On Orders Over $50!

Scrap Wood Trim Picture Frames

Arrow Thin Left Icon Arrow Thin Right Icon
Scrap Wood Trim Picture Frames

Have you been accused of hoarding? If you read my DIY blogs, chances are you like doing projects. As a natural downside to that you probably have lots of scraps of this and that sitting around with great plans in mind. I mean everything has potential, right? Just yesterday I was looking up uses for old barbed wire, but I digress.

Anyway, we hung most of the trim in our house. (The hubs became quite good at crown moulding.) But we had leftovers that I just couldn't part with so I came up with a some projects that would incorporate the mismatched pieces, one of which is picture frames. You may be thinking, 'So what's the big deal about making a picture frame from scrap trim?' Well it's not what you think, exactly. 

This particular scrap frame project uses plywood, old fencing, and lots of random trim pieces, some old, some new, some with paint, others natural or stained. Each one is different and full of texture. If you want to make one for yourself, here are the steps.

Scrap wood frame

 INSTRUCTIONS

  • On a table saw, rip some fence boards to 1.5"-2" wide. Alternatively, purchase 1" x 2" boards. These will become the outer and inner frames.
  • Decide what size opening you want. Decide how wide you want the frame on all sides.
  • Add those dimensions to your opening size to get the overall size and cut a piece of 3/4" plywood to fit. 
  • Mark your opening. 
  • Drill a 3/8" hole in each corner.
Scrap wood picture frame
  • Using the holes as entry points, cut out the center of the plywood with a jigsaw.  
Scrap wood picture frame
  • Cut all trim pieces to the same length, which is the width of the frame on all sides of the opening.
  • Cut outside frame on miter saw 
Scrap wood frame
  • Attach outside frame with nail gun.
Scrap wood frame
  • Arrange trim pieces as desired
  • Clean pieces and paint or stain them
  • Glue and/or nail trim pieces in place
Scrap trim frame
  • Cut inside frame with miter saw.
  • Attach inner frame with nail gun. Position it so it creates a rabbet (ledge) for the artwork to rest upon.
  • Finish painting and/or staining
  • Attach hanging hardware
Scrap wood frame
  • Add mat, glass, and artwork or mirror

ALL DONE!

Scrap wood frame

 

I decided that these would make the perfect addition to our property in Blue Ridge, Century View Lodge. Two of them adorn the bunk room adding function, style, and symmetry to the walls. 

Century View Lodge
Century View Lodge

 

If you like this basic idea but don't have scrap trim, here are some other examples using other wood options. Use your imagination and give it a try!

Scrap wood picture frames

Leave a comment